Skip to product information
1 of 6

Transparent TPU Self Healing Headlight Tint

Transparent TPU Self Healing Headlight Tint


Contact for Wholesale Inquiries

General Description

For any automobile owner, scratches, dings, and debris are a constant source of frustration. What's the answer to this long-standing problem? In order to maintain your vehicle's headlight finish appearing new, use this TPU Self Healing Headlight Tint You can't go wrong with this headlight tint on any vehicle. It gleams in the sunlight and glistens brilliantly at night.

A vehicle is a big investment, and TPU Protection Film is a cost-effective measure to safeguard the integrity of your vehicle’s exterior. You may install and remove the protection film without damaging your vehicle's headlight.

There are various thicknesses of this clear, ultra-thin, durable polyurethane coat which is usually custom cut to fit your vehicle. It's capable of covering any vehicle, even those with intricate curves and shapes. Everything from bumpers, lights, and mirrors to wheel flares and door handles is no match for the fluidity of this protective film.

We are also aware that a car's headlight is vulnerable to etching from acid rain, sap from trees, bugs, and other hazardous substances. But TPU Protection Film also protects your vehicle from rocks, bugs, and more—while decreasing the likelihood of costly repairs. With this film, tiny scratches are even erased over time because it is self-healing.

There is no glue-like residue left behind when TPU Protection Film is applied. There is a 5-year interior and 3-year outdoor life expectancy for this film's protection. Keep your car indoors if at all possible (i.e., garage, shade). When you consider the expense of repainting or replacing your vehicle if it is exposed to the elements, this is a significant benefit. To remove this protective film from your car, just peel it off like a sticker.

Product Structure


Physical Properties 

Classification Unit Spec Remark
Thickness Top protected film um 50±2%


Topcoat um 8±1%


Surface materials um 150±2% Termoplastic Polyurethane
Glue um 28±2% Solvet based
Release liner um 95±2%(plastic) Satin Semi-transparent
Surface Glossy Clear
Super Glossy
Width mm 1520±0. 01%
Length mm 1500+1%

Physical Performance  

Features Test Method Results
Release force
paste on steel board, 90° 26℃ and 60%, GB2792 0.25
Initial tack
under 24℃ and 26%, GB31125-2014 9.44
Peel Strength
paste on steel board, 180° 15 Minutes under 29℃and 55%, GB/T2792-1998 9.29
Holding power(h) paste on steel board,hang on by 25mm*25mm*1kg weight under 29℃ and 55%, GB/T4851-1998 >72
Gloss(60°) GB 8807 ≥90(%)
Application temperature /

+20℃ to +25℃

Service Temperature / -20℃ to +80℃
Humidity Resistance 120 hours exposure No Detrimental Effect
Salt spray Resistance 120 hours exposure No Detrimental Effect
Water Resistance 120 hours exposure No Detrimental Effect
Chemical Resistance 1hour diesel oil immersion,4hours antifreeze immersion No Detrimental Effect
60 degree/GB 8807
Aging Test 1 7 days under 70°C No adhesive residue with heat
Aging Test 2 10 days under 90°C No adhesive residue without heat


Shelf Life

2 years from date of purchase when stored at 50°F to 80°F (15°C – 25°C) and 45% to 50% relative humidity. Optimum recommended storage conditions are 72°F (22°C) and 50% relative humidity.

Important Notice 

Information on physical and chemical characteristics and values in this document are based upon tests we believe to be reliable and do not constitute a warranty. They are intended only as a source of information and are given without guarantee and do not constitute a warranty. Purchasers should independently determine, prior to use, the suitability of this material to their specific use. All technical data are subject to change. In case of any ambiguities or differences between the English and foreign versions of this document, the English version shall be prevailing and leading.

Warranty, Limited Remedy, and Disclaimer

Unless an additional warranty is specifically stated on the applicable VinylFrog product packaging or product literature, VinylFrog warrants that each VinylFrog product meets the applicable VinylFrog product specification at the time VinylFrog ships the product.VinylFrog MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the VinylFrog product does not conform to this warranty, then the sole and exclusive remedy is, at VinylFrog’s option, replacement of the VinylFrog product or refund of the purchase price.

Limitation of Liability

Except where prohibited by law, VinylFrog will not be liable for any loss or damage arising from the VinylFrog product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.

Contact for Wholesale Inquiries View full details