Skip to product information
1 of 11

TPU 9.5mil Paint Protection Film

TPU 9.5mil Paint Protection Film


Contact for Wholesale Inquiries


General Description:

VinylFrog paint protection film UG20 series is a high performance and self-adhesive thermoplastic polyurethane in transparent clear gloss designed to protect a vehicle's finish against; stone chips, road debris, insect stains, small to medium scratches, chemical stains and weathering without degrading the original paint. 

Key features of VinylFrog Paint Protection Film Series include:

▲Flexible clearcoat enables ease of installation.

▲Superior clarity without “orange peel”

▲Outstanding scratch and stain resistance

▲Excellent durability with superior resistance to yellowing and cracking

Product Structure


Physical properties 

Classification Unit Spec Remark
Thickness Clearcoat um 50±2%


Self-healing Coat um 6.5±2%


Face Film um 200±5% Thermoplastic Polyurethane
Acrylic Adhesive um 25±2% Solvent based
Release liner um 75±2% Satin Semi-transparent
Surface Glossy Clear
Super Glossy
Width/roll mm 1520±0. 01% 5ft
Length/roll mm 1500+1% 49.21ft
Adhesive appearance - Clear

Physical Performance

Features Test Method Results
Holding Power(h) paste on steel board, hang on by 25mm*25mm*1kg weight under 29℃ and 55%, GB/T4851-1998 >75
Initial tack
under 24℃ and 26%, GB31125-2014 9.44
Peel Strength
paste on steel board, 180° 15 Minutes under 29℃and 55%, GB/T2792-1998 9.29
Release Force(N/25mm) paste on steel board, 90° 26℃ and 60%, GB2792 0.25
Gloss(60°) GB 8807 ≥90(%)
Elongation at Break GB/T 1040


Tensile Strength GB/T 1040 ≥22(Mpa)
Elongation at Break of Self-healing Coat GB/T 1040 ≥85
Humidity Resistance 120 hours exposure No Detrimental Effect
Salt spray Resistance 120 hours exposure No Detrimental Effect
Water Resistance 120 hours immersion No Detrimental Effect
Chemical Resistance
1hour diesel oil immersion,4hours antifreeze immersion No Detrimental Effect
Aging Tests

70℃ and 7 days

90℃ and 7 days

No adhesive residue with heat

No Adhesive Residue without Heat

Application Temperature /
'+20℃ to +25℃
Service Temperature /
'-20℃ to +80℃
Application Method Wet only /
Substrate types OEM Paint /


Shelf life: 

2 years from date of purchase when stored at 50°F to 80°F (15°C – 25°C) and 45% to 50% relative humidity.

Optimum recommended storage conditions are 72°F (22°C) and 50% relative humidity.

Common Applications:

▲ Protection of the highly sensitive external surfaces of the vehicle like; bumper, side mirrors, hood, headlight & wheel arches.

▲ Protection of internal surfaces like, luggage racks or chairs in busses or trains

▲ Protection of surfaces in high traffic areas like, reception desks, door impact areas, wall panels and more

▲ Partial colour change to high gloss black to accentuate specific car parts like roof, mirrors, hood and more

Important Notice:

Information on physical and chemical characteristics and values in this document are based upon tests we believe to be reliable and do not constitute a warranty. They are intended only as a source of information and are given without guarantee and do not constitute a warranty. Purchasers should independently determine, prior to use, the suitability of this material to their specific use. All technical data are subject to change. In case of any ambiguities or differences between the English and foreign versions of this document, the English version shall be prevailing and leading.

Warranty, Limited Remedy, and Disclaimer:

Unless an additional warranty is specifically stated on the applicable VinylFrog product packaging or product literature, VinylFrog warrants that each VinylFrog product meets the applicable VinylFrog product specification at the time VinylFrog ships the product. VinylFrog MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the VinylFrog product does not conform to this warranty, then the sole and exclusive remedy is, at VinylFrog’s option, replacement of the VinylFrog product or refund of the purchase price.

Limitation of Liability:

Except where prohibited by law, VinylFrog will not be liable for any loss or damage arising from the VinylFrog product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.


Contact for Wholesale Inquiries View full details