Super Glossy Sea Green Vinyl Wrap

Structure

Our products are composed of 4 layers, starting from the outer edge is 1st layer that is to protects the underneath vinyl and is called the protection layer. After that, the high-grade polymeric vinyl is supported with pressure-sensitive acrylic adhesive. Lastly, there is a layer of 160g double-sided silicone coated release liner. 

 

Material

• High Grade Polymeric Calendared Vinyl Film
• Fashionable, Stunning Color

• With Air Release Channel
• Bubble-free Application

• Slideable; Repositionable

Medium Stretchable

The Maximum is 30 %

Easy To Wrap

Functions

Recommended Uses

▲ Standard Size & Appearance

Classification		Unit	Spec	Remark
Thickness	Top protected film	um	36±2%	PET/PVC
	Surface materials	um	115±2%	High-grade PVC-Polymeric
	Glue	um	30±2%	High-quality Solvent-based
	Release liner	um	180±2%(paper)/ 130±2%(plastic)	－
Surface		－	Opaque	－
Width		mm	1520±0. 01%	－
Length		mm	1800+1%	－

 

Physical properties 

▲ General Properties

Features		Test Method	Results
Release force N/25mm		25℃ and 50%	0.12
Initial tack g/25mm		under 26℃ and 64%, GB31125-2014	987
Peel Strength N/25mm		25℃and 42%, GB/T2792-1998	7.25
Holding power(h)		25℃ and 50%, GB/T4851-1998	72.09
Shelf life		stored in +10°C to +20°C, relative humidity 50%, in original package, away from direct sunlight, clean and dry place	2 years
Application temperature		/	+20℃ to +30℃
Aging Test 1		7 days under 65°C	No adhesive residue with heat
Aging Test 2		10 days under 65°C	No adhesive residue without heat
Shrinkage		/	less than 4%

 

If you are looking for something really different then try this super glossy Sea Green vinyl wrap. Add a splash of color to your car with our Super Glossy Sea Green Vinyl wrap. It's fabulous sea green and has a great shine! It looks amazing in the sun and blends right into the background when it’s dark. You can't go wrong with this gloss finish! This color is great for wrapping trucks, vans, motorcycles, ATVs, and other vehicles. The vinyl wrap is crystal clear and easy to install with no mess or residue leftover when peeled off.

We offer this vinyl wrap in several different sizes. This vinyl wrap is made with 100% premium grade cast film which means it will last for years and won’t fade or chip, unlike other cheap alternatives. It has a shiny, glossy finish and a deep reflective quality that adds depth to any vehicle.

The material is thin enough so that you can see your car's original paint job underneath it without sacrificing the durability or strength of the vinyl film. The vinyl features an advanced adhesive backing that allows repositioning during installation without damaging the surface being covered by the vinyl film.

Features Super Glossy Sea Green Vinyl Wrap

• No Bubbles or Wrinkles
• Long-Lasting Durability
• Easy Application
• No Cuts or Mess

The material is very easy to apply: just peel off one side of the protective film from its backing and stick it onto your desired location! No tools are needed to install this glossy wrap. It comes with a protective layer that needs to be removed before applying the decal.

Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater
Application method: Standard methods for calendered films. No overstretching and overheating and Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves, and overlaps
Aftercare: PH neutral, Avoid wax or solvents

CAUTION!
The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.