High Glossy Tiffany Vinyl Wrap

Video

Structure

Our products are composed of 4 layers, starting from the outer edge is 1st layer that is to protect the underneath vinyl and its called protection layer. After that the high grade polymeric vinyl supported with pressure sensitive acrylic adhesive. Lastly there is a layer of 160g double sided silicon coated release liner. 

 

Material

• High Grade Polymeric Calendared Vinyl Film
• Fashionable, Stunning Color

• With Air Release Channel
• Bubble-free Application

• Slideable; Repositionable

Medium Stretchable

The Maximum is 30 %

Functions

Recommended Uses

▲ Standard Size & Appearance

Classification		Unit	Spec	Remark
Thickness	Top protected film	um	36±2%	PET/PVC
	Surface materials	um	100±2%	High-grade PVC-Polymeric
	Glue	um	30±2%	High-quality Solvent-based
	Release liner	um	180±2%(paper)/ 130±2%(plastic)	－
Surface		－	Opaque	－
Width		mm	1520±0. 01%	－
Length		mm	1800+1%	－

 

Physical properties 

▲ General Properties

Features		Test Method	Results
Release force N/25mm		25℃ and 50%	0.12
Initial tack g/25mm		under 26℃ and 64%, GB31125-2014	987
Peel Strength N/25mm		25℃and 42%, GB/T2792-1998	7.25
Holding power(h)		25℃ and 50%, GB/T4851-1998	72.09
Shelf life		stored in +10°C to +20°C, relative humidity 50%, in original package, away from direct sunlight, clean and dry place	2 years
Application temperature		/	+20℃ to +30℃
Aging Test 1		7 days under 65°C	No adhesive residue with heat
Aging Test 2		10 days under 65°C	No adhesive residue without heat
Shrinkage		/	less than 4%

 

Add some glamour to your car with our high gloss tiffany wrap! You can easily revamp your car's look without spending a lot of money. Our high-quality vinyl doesn't fade or crack and can be applied to any smooth surface - even on your trim! This vinyl is super popular because it has a high gloss finish and the color and texture of the real glass. This style is used to give any surface a stunning, three-dimensional appearance!

Our High Glossy Tiffany Vinyl Wrap features a flexible, high-gloss, vinyl film that is easy to apply. Vinyl with a gloss effect works well for vehicle interiors and exteriors. The finish has a luxurious appearance and feels that make it ideal for use on cars, SUVs, and other automotive surfaces.

This vinyl wrap can be applied to any smooth surface that is clean and dry without the need for any special prep work. You simply remove the backing from the vinyl, peel off the transfer tape that comes with it, position it on your vehicle and then rub down the edges using pressure from your hand or an applicator pad. Then just let it sit for about 5 minutes before peeling off any remaining transfer tape or bubbles.

Features High Glossy Tiffany:

• Easy Installation
• High Gloss Finish
• Long-Lasting

The best part about this wrap is its durability and it is due to its ability to resist scratches and fading from sun exposure. This makes it an excellent choice for any vehicle that spends time outdoors or in direct sunlight consistently.

Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater
Application method: Standard methods for calendered films. No overstretching and overheating and Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves, and overlaps
Aftercare: PH neutral, Avoid wax or solvents

CAUTION!
The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.