Skip to product information
1 of 11

High Glossy Paint Black Vinyl Wrap

High Glossy Paint Black Vinyl Wrap


Contact for Wholesale Inquiries



Our products are composed of 4 layers, starting from the outer edge is 1st layer that is to protect the underneath vinyl and its called protection layer. After that the high grade polymeric vinyl supported with pressure sensitive acrylic adhesive. Lastly there is a layer of 160g double sided silicon coated release liner. 



  • High Grade Polymeric Calendared Vinyl Film
  • Fashionable, Stunning Color
  • With Air Release Channel
  • Bubble-free Application
  • Slideable; Repositionable

Medium Stretchable

The Maximum is 30 %


Recommended Uses

▲ Standard Size & Appearance

Classification Unit Spec Remark
Thickness Top protected film um 36±2% PET/PVC
Surface materials um 100±2% High-grade PVC-Polymeric
Glue um 30±2% High-quality Solvent-based
Release liner um 180±2%(paper)/
Surface Opaque
Width mm 1520±0. 01%
Length mm 1800+1%


Physical properties 

▲ General Properties

Features Test Method Results
Release force
25℃ and 50% 0.12
Initial tack
under 26℃ and 64%, GB31125-2014 987
Peel Strength
25℃and 42%, GB/T2792-1998 7.25
Holding power(h) 25℃ and 50%, GB/T4851-1998 72.09
Shelf life stored in +10°C to +20°C, relative humidity 50%, in original package, away from direct sunlight, clean and dry place 2 years
Application temperature / +20℃ to +30℃
Aging Test 1 7 days under 65°C No adhesive residue with heat
Aging Test 2 10 days under 65°C No adhesive residue without heat
Shrinkage / less than 4%


Give your car a sleek new look that complements your sense of style. Our Black Glossy Paint vinyl wrap is a glossy black finish that offers the latest technology in color and protection. Truly an eye-catching finish, this vinyl wrap can be used on your car, truck, or SUV and lasts for years to come. It is not recommended for use on airplanes or other aircraft because the wind resistance will cause it to peel prematurely.

High Glossy Paint Black Vinyl Wrap is a tough, long-lasting wrap that provides an inexpensive alternative to paint and vinyl. It is pre-cut, making it easy to install anywhere on your vehicle or boat. The glossier look of this vinyl wrap gives it a high-end look without the high price tag of painted finishes.

This product features an adhesive-backed pressure-sensitive permanent laminate that adheres to most substrates without heat or tools. This means that it is easy to apply by hand on virtually any surface and allows for repositioning during installation. High Glossy Paint Black Vinyl Wrap is designed for indoor or outdoor use at any temperature. It does not require any special maintenance after installation except for cleaning with mild soap and water or alcohol wipes if necessary.

Features High Glossy Paint Black Vinyl Wrap:

  • Easy Installation
  • High Gloss Finish
  • No Residue When Removed

This product comes in different sizes of rolls so you have plenty of material to work with. The vinyl itself has a thickness of 3 mils (0.003 inches) which allows it to be easily applied while still giving it enough durability to last through years of use.

Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater
Application method: Standard methods for calendered films. No overstretching and overheating and Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves, and overlaps
Aftercare: PH neutral, Avoid wax or solvents

The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.

Contact for Wholesale Inquiries View full details