High Glossy Dark Slate Gray(Nardo Gray) Vinyl Wrap

Structure

Our products are composed of 4 layers, starting from the outer edge is 1st layer that is to protect the underneath vinyl and its called protection layer. After that the high grade polymeric vinyl supported with pressure sensitive acrylic adhesive. Lastly there is a layer of 160g double sided silicon coated release liner. 

 

Material

• High Grade Polymeric Calendared Vinyl Film
• Fashionable, Stunning Color

• With Air Release Channel
• Bubble-free Application

• Slideable; Repositionable

Medium Stretchable

The Maximum is 30 %

Functions

Recommended Uses

▲ Standard Size & Appearance

Classification		Unit	Spec	Remark
Thickness	Top protected film	um	36±2%	PET/PVC
	Surface materials	um	100±2%	High-grade PVC-Polymeric
	Glue	um	30±2%	High-quality Solvent-based
	Release liner	um	180±2%(paper)/ 130±2%(plastic)	－
Surface		－	Opaque	－
Width		mm	1520±0. 01%	－
Length		mm	1800+1%	－

 

Physical properties 

▲ General Properties

Features		Test Method	Results
Release force N/25mm		25℃ and 50%	0.12
Initial tack g/25mm		under 26℃ and 64%, GB31125-2014	987
Peel Strength N/25mm		25℃and 42%, GB/T2792-1998	7.25
Holding power(h)		25℃ and 50%, GB/T4851-1998	72.09
Shelf life		stored in +10°C to +20°C, relative humidity 50%, in original package, away from direct sunlight, clean and dry place	2 years
Application temperature		/	+20℃ to +30℃
Aging Test 1		7 days under 65°C	No adhesive residue with heat
Aging Test 2		10 days under 65°C	No adhesive residue without heat
Shrinkage		/	less than 4%

 

Give your car a classy makeover with the help of this High Glossy Dark Nardo Gray Vinyl wrap. It features a glossy finish that will look great on any color car and gives your vehicle a first-class appearance. Our Dark Nardo Gray Vinyl wrap gives a black and silver effect over any color background such as white or red. These vinyl wraps are available in a wide range of different styles and sizes to suit your tastes. It is applied with heat to prevent bubbles and wrinkles.

Our high-gloss vinyl is a great option for cars that have moderate scratches, or for anyone who just wants to get a good deal on a basic gloss finish. This durable film will provide years of long-lasting protection and also adds an extra layer of UV protection to your car's finish. It will not fade or peel for several years, even in extreme weather conditions.

This vinyl can be used on any part of your car, truck, or SUV whether it be the roof, hood, trunk lid, fenders, or side mirrors. This is high gloss laminated vinyl that looks like paint but lasts much longer and is removable if needed.

Features High Glossy Dark Nardo Gray Vinyl Wrap

• Durable and resistant to scratches, dents, and UV rays
• Easy to install - Just peel and stick!
• Very easy to remove

This product is waterproof and weather-resistant, so you can use it in any weather condition without worrying about it fading or peeling off of your vehicle's body panels due to exposure to elements such as rain or snow. It also resists yellowing over time.

Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater
Application method: Standard methods for calendered films. No overstretching and overheating and Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves, and overlaps
Aftercare: PH neutral, Avoid wax or solvents

CAUTION!
The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.