Video

Structure

Our products are composed of 4 layers, starting from the outer edge is 1st layer that is to protects the underneath vinyl and is called the protection layer. After that, the high-grade polymeric vinyl is supported with pressure-sensitive acrylic adhesive. Lastly, there is a layer of 160g double-sided silicone coated release liner. 

 

Material

• High Grade Polymeric Calendared Vinyl Film
• Fashionable, Stunning Color

• With Air Release Channel
• Bubble-free Application

• Slideable; Repositionable

Medium Stretchable

The Maximum is 30 %

Functions

Recommended Uses

▲ Standard Size & Appearance

Classification		Unit	Spec	Remark
Thickness	Top protected film	um	36±2%	PET/PVC
	Surface materials	um	120±2%	High-grade PVC-Polymeric
	Glue	um	30±2%	High-quality Solvent-based
	Release liner	um	180±2%(paper)/ 130±2%(plastic)	－
Surface		－	Opaque	－
Width		mm	1520±0. 01%	－
Length		mm	1800+1%	－

 

Physical properties 

▲ General Properties

Features		Test Method	Results
Release force N/25mm		25℃ and 50%	0.12
Initial tack g/25mm		under 26℃ and 64%, GB31125-2014	1360
Peel Strength N/25mm		25℃and 42%, GB/T2792-1998	7.05
Holding power(h)		25℃ and 50%, GB/T4851-1998	72.09
Shelf life		stored in +10°C to +20°C, relative humidity 50%, in original package, away from direct sunlight, clean and dry place	2 years
Application temperature		/	+20℃ to +30℃
Aging Test 1		7 days under 65°C	No adhesive residue with heat
Aging Test 2		10 days under 65°C	No adhesive residue without heat
Shrinkage		/	less than 4%

 

This vinyl wrap will give your vehicle a dazzling paint job, like that of an exotic supercar. This wrap vinyl features a glossy metallic finish and is ideal for all types of vehicles. It has a glossy metallic surface that reflects light, making it pop in any environment. This high-quality vinyl wrap will last for years without fading or peeling.

Vinyl Wraps are an economical way to customize and protect any vehicle. Vinyl wraps are made from high-quality adhesive-backed vinyl materials that conform to irregular surfaces such as cars, trucks, and boats - even motorcycles! They are easy to install and remove when necessary (just like window tinting), making them perfect for seasonal changes or special events such as weddings or parties. It's a glossy wrap but with a metallic finish, which helps to add depth and dimension. 

The vinyl is also pre-masked so that you can see exactly where the design goes on your vehicle before applying it. To apply this decal, simply remove the backing paper from one side at a time while gently pulling it away from the surface. Then stick it on your car!

Features Glossy Metallic Indigo Blue Vinyl Wrap

• Easy to apply
• Durable and long-lasting
• Glossy finish
• UV protection - vinyl wraps protect your car's finish against harmful UV rays which causes fading & discoloration over time;
• Waterproof & scratch-resistant 

The vinyl is cut to the shape of your vehicle's bodywork, so there are no visible edges once installed. It will fit the contours of your car exactly, with no bubbles or wrinkles, and will last for years to come.

Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater
Application method: Standard methods for calendered films. No overstretching and overheating and Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves, and overlaps
Aftercare: PH neutral, Avoid wax or solvents

CAUTION!
The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.